Neon L4-2.0L VIN C (1997)
11. Lower vehicle.
Seal Grommet Installation In Floor Pan
12. Grasp park brake cable to floor pan seal grommet by hand, and pull it into floor pan to ensure seal grommet is fully seated into floor pan.
Park Brake Cable Installed In Retaining Bracket
13. Route park brake cable under carpeting and up to park brake cable retaining bracket on floor pan. Then install park brake cable into retaining
bracket. Be sure tabs on park brake cable retainer, have expanded out to hold park brake cable in retaining bracket.
Park Brake Cables At Equalizer
14. Install rear park brake cables into equalizer on park brake lever cable.
15. Reposition rear carpeting.
16. Install both rear door sill plate scuff moldings, by snapping them onto rear door sills.
17. Install lower rear seat cushion. Be sure lower seat cushion is fully installed in retainers on floor pan of vehicle.
