Neon L4-2.0L VIN C (1997)
C-4799-1, or equivalents.
6. Perform fuel system pressure release procedure before attempting any repairs.
7. Disconnect the fuel supply line quick connect at the fuel tube assembly.
CAUTION: Wrap shop towels around hose to catch any gasoline spillage.
8. Remove fuel rail assembly attaching screws and remove fuel rail assembly from engine. Cover injector holes with suitable covering.
CAUTION: Do not set fuel injectors on their tips, damage may occur to the injectors
9. Remove clean air duct and upper air filter housing.
10. Remove accelerator, kickdown and speed control cables from throttle lever and bracket.
11. Disconnect Idle Air Control (IAC) motor and Throttle Position Sensor (TPS) wiring connectors.
12. Disconnect vacuum hoses from throttle body.
13. Disconnect Manifold Absolute Pressure/Intake Air Temperature Sensor (TMAP), electrical connector. Disconnect vapor and brake booster hoses.
