Neon L4-2.0L VIN C (1997)
Blower Motor Resistor: Service and Repair
CAUTION: Blower motor resistor block can be very hot, use caution when working on or near it. Do not operate the blower motor with the resistor
block removed.
REMOVAL
1. Remove windshield wipers.
2. Remove cowl top screen.
3. Disconnect the resistor block wiring connector.
4. Remove two resistor block retaining screws. The screw threads attaching the resistor block are not full length. It is necessary to gently pry out the
resistor block while turning the screws counterclockwise enabling the threads to engages.
5. Remove resistor block from vehicle.
INSTALLATION
For installation, reverse the above procedures.