Neon L4-2.0L VIN C (1997)
Blower Motor Switch: Testing and Inspection
Heater A/C Blower Switch Test
1. Remove Heater A/C control module.
Blower Switch Test
2. Use a ohmmeter, and check continuity between the terminals of the switch as shown in the Blower Switch Test.
3. If the switch fails any part of the continuity test, other then Pin 1 to Pin 7, replace Heater A/C Control. If no continuity between Pin 1 to Pin 7
check the lamps, replace if necessary.
Heater Blower Switch Test
1. Remove heater control.
