Neon L4-2.0L VIN C (1997)
Receiver Dryer: Service and Repair
The filter/drier is mounted in a rubber grommet on the right side of the engine compartment. The refrigerant must be recovered from the A/C system
before replacing the filter/drier assembly.
WARNING: The refrigeration system must be completely recovered before proceeding with this operation.
REMOVAL
1. Disconnect liquid line from filter/drier.
2. Disconnect liquid line on suction line assembly from filter/drier.
3. Pull filter/drier out of rubber grommet.
INSTALLATION
For installation reverse the above procedures.
