Neon L4-2.0L VIN C (1997)
Wheels: Testing and Inspection
Wheels must be replaced if they:
-
Have excessive run out
-
Are bent or dented
-
Leak air
-
Have damaged wheel lug/ nut holes
Wheel repairs employing hammering, heating, welding or repairing leaks are not allowed.
Original equipment replacement wheels should be used. When obtaining replacement wheels, they should be equivalent in load carrying capacity. The
physical dimensions (diameter, width, offset, pilot hole and bolt circle) of the wheel should be the same as the original wheel.
WARNING: Failure to use equivalent replacement wheels may adversely affect the safety and handling of the vehicle. Replacement with used
wheels is not recommended. The service history of the rim may have included severe treatment or very high mileage. The rim could fail without
warning.
