Neon L4-2.0L VIN C (1997)
Brake Warning Lamp Connection To Park Brake Lever
8. Connect electrical connector for brake warning lamp onto terminal on park brake lever assembly.
9. Cycle park brake lever once to position park brake cables. Then return the park brake lever its released position. Check the rear wheels of the
vehicle. They should rotate freely without dragging.
10. Raise park brake lever to its fully engaged position. This is necessary to allow installation of the center console.
11. Install center console assembly.
Attaching Screws At Rear Of Center Console With/Without Arm Rest
Attaching Screws At Rear Of Center Console With Arm Rest
