Neon L4-2.0L VIN C (1997)
5. If vehicle is equipped with ABS brakes, remove the speed sensor head from the rear brake support plate or disc brake adapter.
6. Remove rear hub and bearing assembly retaining nut. Then remove the hub and bearing assembly from knuckle.
7. If vehicle is equipped with rear drum brakes remove the 4 bolts attaching rear brake support plate to knuckle. Then remove brake support plate,
brake shoes and wheel cylinder as an assembly from rear knuckle. It is not necessary to remove brake flex hose from wheel cylinder when removing
support plate. Brake support plate when removed, must be supported in same manner as caliper assembly.
