Neon L4-2.0L VIN C (1997)
NOTE:
THE EFFECTED AREA WILL SHOW SIGNS OF RUST OR PAINT WEAR. THIS IS THE AREA THAT SHOULD BE COVERED BY THE
SPRING SLEEVE.
4.
Apply the spring sleeve (p/n 5273399) to the spring. The spring sleeve should be positioned onto the spring to cover the effected area (Figure 1).
5.
Assemble the strut assembly following the procedure in the 1995 Neon Service Manual (Publication No. 81-270-8025) beginning on page 2-32.
6.
Install the strut assembly into the vehicle following the procedure in the 1998 Neon Service Manual (Publication No. 81-270-8025) beginning on
page 2-16.
7.
Repeat the procedure for the other side.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
02-27-01-92
1.0 Hrs.
FAILURE CODE: P8 - New Part
