Neon L4-2.0L VIN C (1997)
13. With vehicle brakes applied to keep axle shaft from turning, tighten hub nut to 183 Nm (135 ft. lbs.).
14. Install spring washer, hub nut lock and new cotter pin on outer C/V joint stub axle. Wrap the cotter pin prongs tightly around the hub nut lock.
15. Install front wheel and tire assembly. Install front wheel lug nuts and tighten to 135 Nm (100 ft. lbs.).
16. Check for correct fluid level in transaxle assembly.
17. Lower vehicle.
