Neon L4-2.0L VIN C (1997)
4 Door Motor Removal
4. Remove the three nuts attaching the window regulator motor/housing to the door inner panel. This will allow the motor/housing to be moved to the
lower door inner panel opening since the cables will flex.
5. Turn the motor/housing to gain access to the three nuts attaching the motor to the housing.
6. Remove the three nuts attaching the motor to the housing.
7. Remove the motor from the housing. Be careful not to pull the cable drum from the housing, as the motor shaft will tend to pull the drum with it.
INSTALLATION
-
For installation, reverse above procedures.