PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Cruise Control Servo Cable: Service and Repair
Servo to Carburetor Cable Assembly Replacement
1. Remove air cleaner assembly.
2. Disconnect cable at retaining clamp:
a. On front wheel drive models, disconnect cable at carburetor stud by removing spring clip.
b. On rear wheel drive models, disconnect cable at carburetor lost motion link by removing spring clip.
3. Disconnect cable at servo and remove cable assembly.
4. Reverse procedure to install. Leave nut loose and adjust throttle cable free play.
