PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Temperature Warning Lamp/Indicator: Testing and Inspection
A bimetal temperature switch, located in the cylinder head, controls the operation of a temperature indicator light with a red lens. If the engine cooling
system is not functioning properly and coolant temperature exceeds a predetermined value, the warning light will illuminate.
TROUBLESHOOTING
If the red light is not lit when the engine is being cranked, check for a burned out bulb, an open in the light circuit, or a defective ignition switch.
If the red light is lit when the engine is running, check the wiring between light and switch for a ground, defective temperature switch, or overheated
cooling system.
As a test circuit to check whether the red bulb is functioning properly, a wire which is connected to the ground terminal of the ignition switch is
tapped into its circuit. When the ignition is in the "Start" (engine cranking) position, the ground terminal is grounded inside the switch and the
red bulb will be lit. When the engine is started and the ignition switch is in the "On" position, the test circuit is opened and the bulb is then
controlled by the temperature switch.
