PB 150 V8-318 5.2L VIN T 2-BBL (1983)
FIGURE 2D - INSTRUMENT PANEL WIRING
FIGURE 2F - INSTRUMENT PANEL WIRING
6.
Route the orange colored 1-way connector from the instrument panel overlay harness, PN 4362289, to the back of the brake bracket for
mating in a later step (Figures 2-B, 2-D, and 2-F).
Secure instrument panel overlay harness, PN 4362289, using tie wrap, PN 6015756, to keep it clear of any possible interferences.
Only one of the following installation procedures (Step 7) will be used. Take notice of which one applies to the vehicle being repaired.
7.
Without Auxiliary Air Conditioning and/or Heater - Jumper Harness PN 4362291
a.
Remove instrument panel hood and bezel assembly and remove radio.
