PB 150 V8-318 5.2L VIN T 2-BBL (1983)
INSTRUMENT PANEL WIRING
7.
With Auxiliary Air Conditioning and/or Heater Without Power Windows - Relay Harness PN 4362290
a.
Remove instrument panel hood and bezel assembly. Remove radio.
b.
Install the ignition switch protection relay, PN 4162597, to the back of the brake bracket (mounting location shown in Figure 2-B) and
attach instrument panel relay harness, PN 4362290, to relay.
c.
Secure bare eyelet ground terminal (white wire) from instrument panel relay harness, PN 4362290, with screw, PN 9414722, to the
back of the brake bracket (Figure 2-B).
FIGURE 2D - INSTRUMENT PANEL WIRING
d.
Route the dark blue wire from the instrument panel relay harness, PN 4362290 to the existing 3-way red molded connector using
existing wiring clips. Insert bullet terminal (dark blue wire) into red molded connector (Figure 2-D).
