PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Horn Switch: Service and Repair
LUXURY TYPE PADDED STEERING WHEEL
1. Disconnect battery ground cable.
2. Pry off pad, then disconnect electrical connector from horn ring terminal.
3. Remove each horn switch to steering wheel retaining screw and lift out horn button switches from wheel.
4. Remove steering wheel nut, then the wheel using a suitable puller. Do not bump or hammer on steering shaft to remove wheel, as damage to
shaft may result.
5. Reverse procedure to install.
PADDED TYPE EXC. LUXURY TYPE STEERING WHEEL
1. Disconnect battery ground cable.
2. On models with horn pad mounting screws located behind steering wheel spokes, remove screws and the pad. On all other models equipped with
horn pad, pry horn pad from wheel.
3. Disconnect horn switch electrical connector.
4. Remove horn switch to retainer attaching screws, then the switch from retainer.
5. Remove steering wheel nut, then the steering wheel using a suitable puller. Do not bump or hammer on steering shaft to remove wheel, as
damage to shaft may result.
6. Reverse procedure to install.
SPORT STEERING WHEEL
1. Disconnect battery ground cable.
2. Lift horn button off wheel, then disconnect switch electrical connector.
3. Remove steering wheel nut.
4. Remove horn switch to steering wheel attaching screw, then the horn switch.
5. Remove steering wheel using suitable puller. Do not bump or hammer on steering shaft to remove wheel, as damage to shaft may result.
6. Reverse procedure to install.
