PB 150 V8-318 5.2L VIN T 2-BBL (1983)
16. Slide housing head over worm shaft, engaging cylinder head ferrule and O-ring and ensuring reaction rings enter circular grooves in housing head.
Constant Control Type Power Steering Gear Repairs
Prior to disassembly, clean the gear assembly thoroughly in a suitable solvent. Crocus cloth may be used to remove small nicks and burrs provided it is
used carefully. When used on the steering gear valve, use extreme care not to round off the sharp edge portions of the two lands located between the
valve drilled holes. Remove and discard all O-ring seals, using new ones lubricated with fluid when reassembling.
Steering Gear Housing
Prior to disassembly, clean the gear assembly thoroughly in a suitable solvent. Crocus cloth may be used to remove small nicks and burrs provided it is
used carefully. When used on the steering gear valve, use extreme care not to round off the sharp edge portions of the two lands located between the
valve drilled holes. Remove and discard all O-ring seals, using new ones lubricated with fluid when reassembling.
