Prowler V6-3.5L VIN G (1999)
Stub Shaft To Hub Bearing Nut
2. With the weight of the vehicle supported by the tires and the parking brake applied, loosen but do not remove the stub shaft to hub bearing nut.
3. Raise the vehicle on jackstands or centered on a frame contact type hoist.
4. Remove the wheel and tire.
Disc Brake Caliper Mounting Bolts
5. Remove the 2 bolts, mounting rear disc brake caliper to caliper adapter.
Rear Brake Caliper Remove/Install
6. Remove disc brake caliper from caliper adapter. Caliper is removed by first rotating free end of caliper away from caliper adapter. Then with free
end of caliper rotated away from adapter, lift caliper off the caliper adapter.
