Prowler V6-3.5L VIN G (1999)
Brake Pad: Specifications
Brake Pad Specifications
Brake Pad Specifications
BRAKE ROTOR
Front
Rear
BRAKE PAD FRICTION MATERIAL
Organic, Non-Asbestos
Organic, Non-Asbestos
FRICTION MATERIAL FORMULA
BBA-2004TA
BBA-2007
IDENTIFICATION
BRAKE PAD MINIMUM THICKNESS
7.95 mm (5/16 in.)
7.0 mm (9/32 in.)
The combined brake shoe and lining material thickness
When the front brake pads are replaced, only brake pads
The rear disc brake rotors on this vehicle are made from
should be measured at the thinnest part of the assembly.
meeting the OEM material formulation should be used. This
aluminum. For this reason, to prevent severe scoring of
is required to maintain the original braking performance of
the rotors, only Mopar OEM replacement brake pads using
this vehicle.
the OEM friction material are to be used when brake pad
replacement is required.
Brake Shoe Thickness Measurement
Brake Shoe Thickness Measurement