Prowler V6-3.5L VIN G (1999)
Brake Rotor/Disc: Specifications
Brake Rotor Specifications
Brake Rotor Specifications
BRAKE ROTOR
Front
Rear
BRAKE ROTOR TYPE
Vented
Vented
BRAKE ROTOR MATERIAL
Grey Iron, Dacromet-Coated
Aluminum Silica Carbide Alloy
BRAKE ROTOR DIAMETER
282 mm (11.1 in.)
330 mm (13.0 in.)
ROTOR THICKNESS
23.87 - 24.13 mm (0.939 - 0.950 in.)
19.87 - 20.13 mm (0.782 - 0.793 in.)
MINIMUM ROTOR THICKNESS
22.4 mm (0.882 in.)
18.7 mm (0.736 in.)
Minimum allowable thickness markings are cast/stamped on an
un-machined surface of the rotor. This marking includes
0.76 mm (0.030 in.) allowable rotor wear beyond the
recommended 0.76 mm (0.030 in.) of rotor refacing.
ROTOR THICKNESS VARIATION
0.013 mm (0.0005 in.)
0.013 mm (0.0005 in.)
ROTOR RUNOUT *
0.08 mm (0.003 in.)
0.08 mm (0.003 in.)
* TIR - Total Indicator Reading (measured on vehicle)
ROTOR MICRO-FINISH
15 - 80 RMS
15 - 80 RMS
Front Rotor Minimum Thickness Marking
Rear Rotor Minimum Thickness Marking
