Prowler V6-3.5L VIN G (1999)
Coolant Reservoir: Service and Repair
Removal
1. Drain cooling system below coolant bottle level.
2. Remove right side engine compartment support.
Coolant Pressure Bottle - Removal/Installation
3. Remove attaching nuts and remove coolant bottle.
4. Remove coolant hoses at bottle.
Installation
1. Attach coolant hoses to coolant bottle.
2. Install coolant bottle and tighten mounting nuts to 6.8 Nm (60 inch lbs.).
3. Install right side engine compartment support.
4. Fill cooling system.