plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Engine - Cold Start Ticking Noise|Page 1156 > < Camshaft, Engine|Removal and Installation|Page 1147
Page 1
background image

Rocker Arm Assembly: Customer Interest
Engine - Cold Start Ticking Noise

NUMBER: 09-002-04

GROUP: Engine

DATE: January 27, 2004

THIS BULLETIN SUPERSEDES SERVICE BULLETIN 09-005-03 DATED NOVEMBER 21, 2003, WHICH SHOULD BE REMOVED FROM
YOUR FILES.

ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES AN ADDITIONAL VEHICLE MODEL AND YEARS.

SUBJECT:
Short Duration Cold Engine Start-up Ticking Like Sound

OVERVIEW:
This bulletin involves replacing the swivel pads and swivel pad retainer on the exhaust rocker arms.

MODELS:

1998 - **2004**

(LH)

300M/Concorde/Intrepid/LHS

2004

(CS)

Pacifica

**1999 - 2002

(PR)

Prowler**

NOTE:

This bulletin applies to vehicles built prior to March 31, 2003 (MDH 0331xx) equipped with a 3.2L or 3.5L engine (sales codes EGC, EGE, EGG,
EGJ, EGK, EGN AND EGW).

SYMPTOM/CONDITION:

Engine ticking like sound after a cold engine start-up. The ticking like sound may only last 2 to 3 seconds.

PARTS REQUIRED:

REPAIR PROCEDURE:

1.

Remove cylinder head covers. Refer to the service information available on TechCONNECT or in the appropriate service manual in Section 9 -
ENGINE/CYLINDER HEAD/CYLINDER HEAD COVER(S) - REMOVAL for detailed removal instructions.

Engine - Cold Start Ticking Noise|Page 1156 > < Camshaft, Engine|Removal and Installation|Page 1147