Prowler V6-3.5L VIN G (1999)
Crankshaft: Service and Repair
Service Procedures
Crankshaft End Play Measurement
Checking Crankshaft End Play
1. Using Dial Indicator C-3339 and Mounting Post L-4438, attach to front of engine, locating probe perpendicular on nose of crankshaft.
2. Move crankshaft all the way to the rear of its travel.
3. Zero the dial indicator.
4. Move crankshaft all the way to the front and read the dial indicator. Refer to Crankshaft End Play Specification Chart below.
Crankshaft End Play Specification Chart
Fitting Bearings
The main bearings are a "select fit" to achieve proper oil clearances. For main bearing selection, the block and crankshaft have grade identification
marks.
Cylinder Block Main Bore Grade Marking Location
The marks for the cylinder block main bore grade are located on the left side pan rail, just rear of the left engine mount bracket. These grade marks (1,
2, or 3) are read left to right, corresponding to main bore 1, 2, 3, 4.