plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Brake Light Switch > < Backup Light Bulb|Service and Repair
Page 1
background image

Brake Light Bulb: Service and Repair

REMOVAL

Access Door

1. Remove screws attaching the tail/stop/turn signal lamp access door to the body.
2. Remove access door.
3. Rotate bulb socket counterclockwise one quarter turn.

Headlamp Bulb Access Cover Screws

4. Pull bulb socket from the tail/stop/side marker/ turn signal lamp.
5. Pull bulb from the bulb socket.

INSTALLATION

1. Push bulb into the bulb socket.
2. Push bulb socket into back of tail/stop/turn signal lamp.
3. Rotate bulb socket clockwise one quarter turn.
4. Position the lamp access door on the body.
5. Install screws attaching lamp access door to the body
6. Verify proper operation.

Brake Light Switch > < Backup Light Bulb|Service and Repair