Prowler V6-3.5L VIN G (1999)
Wheels: Description and Operation
GENERAL INFORMATION
The original equipment wheels used on this vehicle are designed for satisfactory operation of the vehicle at all loads.
The road wheels used on this vehicle are a cast aluminum full face modular two piece wheel. The safety rim wheel has raised sections between the
rim flanges and the rim well.
Initial inflation of the tire forces the bead over these raised sections. In case of tire failure the raised sections help hold the tire in position on the
wheel until the vehicle can be brought to a safe stop.
The cast aluminum wheels used on this vehicle require the use of special balance weights and balance weight locations. These wheels also require
the use of special wheel clamps for the attachment of the alignment heads to the wheel.
CAUTION: Failure to use the correct wheel clamps will result in damage to the wheels and incorrect attachment of the alignment heads to the
wheels.
WHEEL SIZE
This vehicle is equipped with front and rear wheels having different diameters and widths.
The wheels used on the front of the vehicle are 17 inches in diameter and are 7 1/2 inches wide.
The wheels used on the rear of the vehicle are 20 inches in diameter and are 10 inches wide.
Due to the wheel diameters and widths being different on the front and the rear of the vehicle the wheels can not be switched from the front to the
rear of the vehicle.
CAUTION: Do not interchange the wheels from the front to the rear of the vehicle.
