Prowler V6-3.5L VIN G (1999)
EGR Tube: Service and Repair
EGR TUBE
Intake Manifold EGR Port Location
The EGR tube attaches to the bottom of the intake manifold plenum beside the throttle body.
REMOVAL
1. Disconnect negative battery cable.
2. Remove air inlet tube and resonator.
EGR Tube
3. Remove EGR tube mounting clips at intake manifold plenum.
4. Remove Intake Plenum.
5. Remove EGR tube mounting screws at EGR valve.
When removing EGR upper tube assembly being careful not to drop the silicone rubber seals in the intake manifold. Clean gasket surfaces on the
EGR valve. Note that any loose dirt can lodge between the pintle and the seat and cause valve leakage that will give a rough idle and depressed
manifold vacuum.
6. Remove EGR tube.
INSTALLATION