Prowler V6-3.5L VIN G (1999)
Accelerator Pedal Removal/Installation
3. Working from the engine compartment, remove nuts from accelerator pedal base. Remove pedal and base from vehicle.
INSTALLATION
1. Position accelerator pedal assembly to floor pan. Install mounting nuts and tighten to 12 Nm (105 in. lbs.) torque.
2. From inside the vehicle, hold up the pedal and install the throttle cable and cable retainer in the upper end of the pedal shaft.
3. From the engine compartment, hold the throttle body lever in the wide open position and install the throttle cable.