plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Part 1 of 3|Page 129 > < Part 1 of 3|Page 127
Page 4
background image

tone.

If the tire pressure is critical, the low tire pressure warning lamp signal circuit will be pulsed to ground by the LTPW module for one second
on then one second oft. The BCM will then illuminate the "Low Tire" lamp and sound the chime tone at the rate of one second off and one
second
 on.

The module will continue to pulse to ground the low tire pressure warning lamp signal circuit until the ignition is turned off, or the tire pressure
transmitter(s) transmits a pressure above the calibrated threshold.

NOTE:   A low tire pressure condition does not set a DTC. The DRB can be used to view the last 32 transmissions in the module's memory
and to confirm which tire was reporting the low pressure condition.

If more than one condition is set at the same time, the LTPW module will prioritize how the "Low Tire" lamp will be illuminated. The priority
rankings are listed below.

Critical Pressure - Lamp flashes at one second on and one second off
Low Pressure - Lamp flashes at two seconds on and two seconds off
LTPW Module Failure (DTC) - Lamp on steady
Tire Pressure Sensor/Transmitter(DTC) - Lamp on steady
Less than four transmitter IDs learn - Lamp on steady
Critical tire pressure is zero - Lamp on steady
Normal tire pressure - No lamp
No faults - No lamp

Part 1 of 3|Page 129 > < Part 1 of 3|Page 127