Prowler V6-3.5L VIN G (1999)
Power Steering Fluid Reservoir: Service and Repair
WARNING: Power steering oil, engine components and the exhaust system may be extremely hot if engine has been running. Do not start
engine with any loose or disconnected hoses or drive belts. Do not allow hoses to touch hot exhaust manifold or catalyst.
REMOVE
1. Using a siphon pump, remove as much power steering fluid as possible from the power steering fluid reservoir.
2. Remove the 3 bolts attaching body side panel. Remove body side panel by pulling upward until lower retaining clips come out of valance panel.
CAUTION: When removing power steering fluid return hose from power steering fluid reservoir do not use excessive force. The fitting for the
power steering fluid return hose could be broken off the reservoir.
3. Remove hose clamp from power steering fluid return hose. Remove power steering fluid return hose from power steering fluid reservoir.