plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Track Bar <--> [Lateral Stabilizer Rod]|Specifications|Page 4209 > < Track Bar <--> [Lateral Stabilizer Rod]|Specifications
Page 1
background image

Track Bar: Description and Operation

The lateral movement of the rear knuckle is controlled by the lateral links going from the front and rear of the knuckle to the frame of the vehicle. Fore
and aft movement of the knuckle is controlled by a trailing link.

The lateral links and trailing link have rubber isolator bushings at each end to isolate suspension noise from the body of the vehicle.

The trailing link bolts to the top of the knuckle and to a bracket welded to the rear frame rail.

The lateral links, trailing arms and knuckles are normally replaced only when the part has been damaged or when the vehicle has been involved in an
accident. If a suspension part has been damaged, be sure to check the underbody dimensions of the car. If the underbody dimensions are not correct, the
frame of the vehicle must be straightened, before replacement suspension components are installed.

Track Bar <--> [Lateral Stabilizer Rod]|Specifications|Page 4209 > < Track Bar <--> [Lateral Stabilizer Rod]|Specifications