Reliant-K L4-156 2.6L VIN G 2-bbl (1983)
8.
Attach the pressure regulator assembly, PN 4307234, to the bracket (Figure 1) using two self-tapping screws, PN 6033066. Tighten screws
securely.
9.
Rotate the clamp on the coolant hose near the fuel reservoir so no sharp metal corners contact the fuel hoses routed over the clamp.
Connect hose, PN 4307762, from the fuel reservoir outlet on the bottom of the reservoir to the pressure regulator inlet (lower fitting) (Figure 1).
Route this hose over the coolant hose and under the ignition wires. Clamp with hose clamp, PN 6500650. Torque to 10 inch pounds.
10.
Vehicles Equipped Without Fuel Flow Sensor
