Reliant-K L4-156 2.6L VIN G 2-bbl (1983)
SCREWDRIVER BY LIGHTLY TAPPING WITH A HAMMER ON THE END OF THE SCREWDRIVER. (DO NOT REMOVE
SCREWS AT THIS TIME, JUST LOOSEN THEM.)
4.
Remove the four (4) hold-down bolts that pass through carburetor, then remove carburetor for disassembly.
5.
For carburetor disassembly, follow procedures in the respective year service manual.
CAUTION: WHEN SEPARATING THE AIR HORN FROM MAIN BODY, DO NOT PRY ON ANY SOLENOIDS.
FIGURE 1
FIGURE 2 - ILLUSTRATION OF INSTALLATION
