Reliant L4-156 2.6L SOHC (1984)
Timing Chain: Service and Repair
Timing Chain & Sprockets Replacement
Fig. 9 Camshaft drive chain, replace
Fig. 11 Timing chain installation
1.
Install sprocket holder, then left and right chain guides, Fig. 11.
2.
Rotate crankshaft until No. 1 piston is at TDC on compression stroke.
3.
Install tensioner spring assembly onto oil pump body, Fig. 9.
4.
Install timing chain on camshaft sprocket and crankshaft sprocket. Ensure timing marks are aligned, Fig. 11. Timing marks on sprockets are punch
marks on teeth while timing marks on chain are plated links.
5.
Align crankshaft sprocket to crankshaft keyway and slide into place. Align camshaft sprocket dowel hole to camshaft dowel hole.
6.
Install dowel pin, then the distributor drive gear. Install sprocket screw onto camshaft and torque to 40 ft. lbs.
