Reliant L4-156 2.6L SOHC (1984)
FIGURE 4 - FUEL RESERVOIR & PRESSURE REGULATOR CONNECTIONS WITHOUT FUEL FLOW SENSOR
2.
Remove the vapor return hose between the fuel pump and chassis return line. Install the Y connector/hose assembly, PN 4307397, with the
curved leg of the Y connector pointing straight up. Connect the three hoses to the fuel pump vent, reservoir vent, and chassis fuel return line
using 3 hose clamps, PN 6500650, as shown in Figure 4. Torque to 10 inch pounds.
3.
Remove the thermostat housing bolt closest to the carburetor (already removed in Step 1 if car had a reservoir) and coat threads with
Loctite/Mopar Sealant, PN 4318034. Install the reservoir assembly, PN 4307358, to the thermostat housing using the bolt just removed.
Retorque the bolt to 12 to 17 foot pounds (Figure 4- A).
4.
Remove the existing hose clip on the valve cover and discard.
