Reliant L4-156 2.6L SOHC (1984)
Connect hose, PN 4307763, from the pressure regulator outlet (upper fitting) to the carburetor fuel inlet (Figure 4). Clamp with hose clamp, PN
6500650. Torque to 10 inch pounds.
FIGURE 7 - FUEL RESERVOIR & PRESSURE REGULATOR CONNECTIONS WITH FUEL FLOW SENSOR
Vehicles Equipped With Fuel Flow Sensor
Remove inlet nipple of fuel flow sensor and discard. Install new 30~ inlet nipple, PN 4307236, with nipple pointing to driver's side of car and
slightly downward (Figure 7).
Remove the fuel filter-to-fuel pump hose at the fuel filter and slide convolute sleeve, PN 4279993, over the fuel hose. Reattach the hose to the fuel filter
using the original hose clamp.
