plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Fuel System - Engine Sag/Poor Performance|Page 2792 > < Fuel System - Engine Sag/Poor Performance|Page 2790
Page 8
background image

no sharp metal edges contact the fuel filter-to-fuel pump hose. Torque to 10 inch pounds.

11.

Place the four fuel hoses listed below in clip, PN 4307242, starting with the hose closest to the attaching screw (Figure 1).
a.

Chassis fuel supply line to fuel filter inlet hose.

b.

Vapor return hose from the fuel pump and reservoir to the chassis return line.

c.

Pressure regulator outlet to carburetor inlet hose (regulator-to-fuel flow sensor, if so equipped).

d.

Fuel reservoir to pressure regulator inlet hose.

Fuel System - Engine Sag/Poor Performance|Page 2792 > < Fuel System - Engine Sag/Poor Performance|Page 2790