Sundance L4-135 2.2L SOHC (1987)
Rollover/Pressure Relief Valve: Service and Repair
Fuel Tank Pressure Relief And Roll-Over Valve
Removal
1. Remove fuel tank.
2. Wedge the blade of a screwdriver between the rubber grommet and the fuel tank where the support rib is located. Do not wedge between the
valve and the grommet or damage to the valve may result upon removal.
3. Use a second screwdriver as a support to pry the valve and grommet assembly from the tank.
4. To remove the grommet from the valve simply place the valve upright on a flat surface and push down on the grommet peeling it down off the
valve.
Installation