Sundance L4-135 2.2L SOHC (1987)
FIGURE 5
5.
Insert the reinforcement bracket into the access hole in the "C" pillar between the rear door opening and liftgate opening as shown in Figure 5.
6.
Hold the bracket in position and drive screw, PN 9422202, through the screw hole in the pillar and into the bracket. Be sure the weld nut of the
bracket is aligned with the large hole in the pillar before tightening the screw (Figure 5).
7.
Reinstall the trim panel.
8.
Install the upper shoulder belt, PN 4476254, using the bronze colored bolt, PN 6031217 (K-17 is on bolt head). The white label on seat belt