plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Trim Panel > < Interior Moulding / Trim|Service and Repair
Page 1
background image

Headliner: Service and Repair

Headlining With Sunroof

1. Disconnect battery.
2. Open liftgate and remove shelf trim panel.
3. Remove rear header garnish moulding.
4. Remove rear door roof rail garnish mouldings.
5. Remove coat hooks.
6. Carefully pull away top of quarter trim panels.
7. Remove sun visors and brackets.
8. Carefully pull "A" post garnish mouldings at top two clip locations only.

NOTE:   Use care, so as not to damage clip or mouldings.

9. Remove seat belt anchor bolt covers on "B" post.

10. Carefully pull away top of "B" post garnish moulding.
11. Remove dome lamp assembly.
12. If equipped with sun roof, remove sun roof catch and trim cord.
13. Slide out headliner through liftgate opening, carefully holding garnish mouldings away from headliner.
14. Reverse this procedure to install.

Trim Panel > < Interior Moulding / Trim|Service and Repair