plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Engine - Rubbing/Scraping Noise at Front|Page 567 > < Engine - Rubbing/Scraping Noise at Front|Page 561
Page 1
background image

Timing Belt: All Technical Service Bulletins
Engine - Rubbing/Scraping Noise at Front

SUBJECT: Camshaft Timing Belt Noise 1990-91 2.2L/2.5L Engines Without A/C

NO.: 09-03-91

GROUP: ENGINE

DATE: March 25, 1991

MODELS:

1990 - 1991

(AA) ACCLAIM/SPIRIT
(AC) DYNASTY 
(AG) DAYTONA 
(AJ) LeBARON COUPE/LEBARON CONVERTIBLE 
(AN) DAKOTA 
(AP) SHADOW/SUNDANCE 
(AS) CARAVAN/GRAND CARAVAN/CARAVAN C/V 

VOYAGER/GRAND VOYAGER

SYMPTOM/CONDITION:

Some 1990 - 1991 non A/C equipped vehicles with 2.2L and 2.5L engines may exhibit a rubbing or scraping noise at the front of the engine. This noise
is most noticeable in the area of the camshaft timing belt cover.

The noise condition may be caused by the lower timing belt cover contacting the intermediate shaft sprocket.

Figure 1

DIAGNOSIS:

With the engine turned off, check the engine serial number. If the serial number is between XXXXXX0429XX and XXXXXX0838XX press on the
lower timing belt cover in the area shown in Figure 1. If the cover does not flex or feels solid, perform the repair procedure.

NOTE:

THE SERIAL NUMBER IS LOCATED ON THE REAR FACE OF THE ENGINE BLOCK DIRECTLY BELOW THE CYLINDER
HEAD.

If the lower cover flexes, or the engine serial is before or after the above numbers, continue your inspection and repair as required.

REPAIR PROCEDURE:

This repair involves removing and modifying the lower timing belt cover.

1.

Remove the upper and lower camshaft timing belt covers.

Engine - Rubbing/Scraping Noise at Front|Page 567 > < Engine - Rubbing/Scraping Noise at Front|Page 561