Sundance L4-153 2.5L SOHC VIN K TBI (1992)
Temperature Gauge: Testing and Inspection
Temperature Gauge Test
1.
Run engine until normal operating temperature is reached. Record gauge position.
2.
Turn ignition Off and remove temperature gauge assembly from cluster.
Instrument Cluster With Tachometer
Instrument Cluster Without Tachometer
3.
With ignition switch in On position, check for battery voltage across Ignition pin and ground pin.
^
If voltage or ground are missing, check wiring, printed circuit board and connections.
4.
Connect an ohmmeter to the temperature sending unit pin and the ground pin.
