Sundance Duster L4-153 2.5L SOHC VIN K TBI (1993)
Differential Retainer Bolts
Remove Bearing Retainer
2. Remove the differential bearing retainer and bolts.
3. Using a plastic hammer, remove extension housing/adapter plate on the right side of the transaxle.
WARNING: Hold onto differential assembly to prevent it from rolling out of housing.
4. Use Miller Special Tool 5048, 5048-3 Collets, and L-4539-2 Button to remove the differential bearing cone on the extension housing side.
Position Button And Collets Onto Differential And Bearing (Ring Gear Side)
