Voyager L4-135 2.2L SOHC (1985)
FIGURE 1-B - ENGINE COMPARTMENT WIRING
FIGURE 1-C - ENGINE COMPARTMENT WIRING
4.
Route the overlay harness along the existing headlamp-to-dash main harness from the coil forward to radiator cowl panel, then toward the left
side of the engine compartment under fans and radiator as shown in Figure 1-B. Then route harness upward and toward the rear of the engine
compartment to the bulkhead connector as shown in Figure 1-C. Pass it through the large retainer clip nearest the bulkhead connector. Secure
the overlay harness by using existing wiring clips and six tie wraps, PN 6015756, as shown in Figures 1-B and 1-C.