Voyager L4-135 2.2L SOHC (1985)
FIGURE 3-A
2.
Insert the "basket handle" type clip into the existing ring clip on rear crossmember. Route the harness along the rear crossmember to the left
frame rail. Secure the harness using two tie wraps, PN 6015756 (Figure 3-A).
FIGURE 3-B - BODY WIRING
3.
Route the body harness, PN 4331724, along the existing brake lines on the left frame rail, working toward the engine compartment. Secure
the harness with eight (8) tie wraps, PN 6015756, locating each tie wrap near the existing brake line clips (Figure 3-B).