Voyager L4-153 2.5L SOHC (1990)
Brake Shoe Contact Pads On Backing (Support) Plate
NOTE: Lubricate the six shoe tab contact pads on support plate with a thin film of MOPAR Multi- Purpose Lubricant, Part number 2932524 or
equivalent.
Fig 3 Removing And Installing Shoe Retainers, Springs And Nails
1. Slide primary shoe against support plate, at the same time engage shoe web with wheel cylinder piston and against anchor. Using tool C-4070 or
equivalent install shoe retaining nail, retainer, and spring.
NOTE: For additional information see Brake Spring Removal and Installation Notes.
Fig 7 Removing Of Installing Parking Brake Strut And Spring