Voyager L4-153 2.5L SOHC (1990)
3. Press hub into bearing with Tools, C-4811-1,-2,-9,-11.
4. Position new seal in recess and assemble installer Tool C-4698 (tool is provided with a handle and dual purpose drive head for installing seal into
knuckle and (head reversed) for installing wear sleeve into C/V joint housing).
5. Assemble tool and install seal.
CAUTION: During any service procedures where knuckle and driveshaft are separated, thoroughly clean seal and wear sleeve and relubricate BOTH
components.
6. Lubricate the full circumference of the seal (and wear sleeve) with MOPAR Multi-Purpose Lubricant, Part Number 4318063, or equivalent.
