Voyager L4-153 2.5L SOHC (1990)
Power Window Switch: Testing and Inspection
Power Window Switch Test
Passenger Power Window Switch And/Or Rear Vent Window Switch Continuity
Drivers Power Window Switch Continuity
1.
If the failure is in the right side door, remove the right power window switch from the door trim panel.
2.
Connect jumper wires to the right power window switch connector as shown. The jumper wires take the place of a good switch in the inactive
position.
3.
Using the drivers side power window switch, activate the windows up and down. If the power windows now operate properly, replace the
passenger side switch. If the power windows still do not operate, go to step 4.
4.
Remove the drivers side power window switch from the door trim panel.