Voyager L4-153 2.5L SOHC (1990)
a. Back out one of the bearing retainer screws and install bracket C-4811-17 between screw and retainer.
b. Place thrust button, Tool C-4811-6, inside hub bore.
c. Position Tool C-4811-14 and install two screws firmly into tapped brake adapter extensions, also nut and washer on bracket screw.
d. Tighten screw on Tool C-4811-14 to remove hub from bearing
e. Should the outboard inner bearing race remain on the hub, it may be removed by using a universal puller and a clamp and the thrust button.
f.
Remove Tool C-4811-14 and attaching screws from steering knuckle.
13. Remove three screws and bearing retainer from knuckle.
