Voyager L4-153 2.5L SOHC (1990)
FOR VEHICLES WITH 3.OL ENGINE:
A.
Remove left side wheel housing (splash shield).
B.
Drain radiator coolant by removing lower radiator hose at the radiator. BE SURE THAT COOLANT SYSTEM IS NOT UNDER
PRESSURE.
C.
Place floorjack under transaxle, remove left side engine mount bolt, and lower transaxle. With transaxle lowered, allow coolant to
drain completely out of lower radiator hose.
D.
Remove lower radiator hose at engine and plug coolant tube on the engine so that no coolant will drip into transaxle when shift cover
is removed.
E.
Remove shift cables at transaxle.
F.
Invert 10 mm lock pin so that pointed end inserts into shift housing.
G.
Remove reverse lamp wire connector.
H.
Remove shift housing retaining bolts and remove housing from transaxle.
I.
Proceed to Step 2 below.
Figure 1
2.
Remove vent cap (Figure 1).
Figure 2
3.
Remove external crossover lever by tapping out roll pin using a small drift punch (Figure 2).
