Voyager L4-153 2.5L SOHC Turbo (1989)
Rear A/C Plumbing
4.
Disconnect the a/c plumbing at the rear heat-a/c unit.
5.
Remove the left rear quarter trim panels.
6.
Remove the attaching screws at the air distribution duct.
7.
Remove the attaching screws that anchor the rear heat-a/c unit to the floor and the quarter panel support.
8.
Lift the unit up and remove it from the car.
INSTALLATION
1.
Place the rear heat-a/c unit in the vehicle and anchor to the floor and the quarter panel support with original screws.
2.
Install air distribution duct.
3.
Install rear coolent hoses and refill engine coolent system.
4.
Install rear a/c lines using new gaskets.
5.
Evacuate and recharge a/c system.See: Service and Repair/Refrigerant System Evacuate
6.
Test for leaks and overall performance of system.
7.
Install left rear quarter trim panels.
